■ Limiting continuous current 75A at 23°C
■ Current switching ability up to 150An Suitable for voltage levels up to 24VDC
■ Minimal contact resistance
■ Dustproof version

■ Limiting continuous current 130A at 85°C
■ Current switching ability up to 300A
■ Suitable for voltage levels up to 24VDC
■ Heat, moisture and vibration resistant
■ Minimal contact
■ Dustproof and sealed versios

■ Normally closed contact
■ Limiting continuous current 175A at 85°C

■ Limiting continuous current 190 A at 85°C
■ Electrically settable and resettable ON/OFF bistable device
■ Suitable for voltage levels up to 42 V
■ High peak current carrying capability up to 1500 A

■ Suitable for voltage levels up to 450VDC
■ Precharge currents up to 20A
■ Limiting break currents up to 20A
■ Available with PCB and plug-in terminals
■ IEC 60664 compliant

APPLICATIONS
•Main power relay for hybrid electric vehicles
•Accessory relays for high voltage system
•High speed pre-charging
MECHANICAL
•Compact epoxy-sealed resin enclosure occupies about 65.5 cm3 volume
•Robust mounting plate with side or bottom mounting option for M4 screws•Inert gas filled contact chamber
•Flying leads for coil connections
•Load terminals threaded for M5 bolts
•Mechanical life: 1 million cycles
ELECTRICAL
•Contactor arrangement: Main contacts SPST–NO-DM (1 form X)
•Voltage rating (max): 900 VDC
•Continuous current rating: 135 Amps
•Short term current rating (3 min): 200 Amps
•Coil operation voltage: 12V
•Coil resistance (+20 °C): 26 ohms, 15.3 ohms, 3.8 ohms available for different pull-in voltages

■ Limiting continuous current 175A at +85°C
■ Suitable for voltage levels up to 500VDC
■ High peak current carrying capability up to 5000A1)
■ IEC 60664 (2007) complia

■ Limiting continuous current 250A at 85°C
■ Suitable for voltage levels up to 450VDC
■ High peak current carrying capability up to 6000A

■ Limiting continuous current 500A at 85°C (with 400mcm conductors)
■ Hermetically sealed
■ UL approved

■ Smallest magnetically latched PBC relay
■ Only set and reset pulse no continuous coils power required
■ Increased ambient temperature range up to 125°C
■ Limiting continuous current up to 40A
■ Footprint compatible with Micro Relay K
■ Two coils with set and reset function
■ Minimal weight
■ For monostable single version refer to Micro Relay K
■ For monostable twin version refer to Double Micro Relay K

■ Small power relay
■ Limiting continuous current 20A at 85°C
■ Minimal weight
■ Low noise operation
■ Wave (THT) and reflow (THR/pin-in-paste) solderable versions
■ For single version refer to Single Micro Relay

■ Limiting continuous current 45A
■ Wide voltage range

■ High endurance performance up to 125°C
■ Minimized coil power consumption
■ Limiting continuous current 45A at 85°C
■ Maximum switch on current 200A
■ High shock and vibration resistance
■ No change of switching state at breakdown of battery voltage
■ Wave (THT) and reflow (THR/pin-in-paste) solderable versions
■ For monostable version refer to Power Relay PK2 HE (THT – THR)

■ High endurance performance up to 125°C
■ Limiting continuous current 40A at 85°C
■ Maximum switch on current 250A
■ High shock and vibration resistance
■ Wave (THT) and reflow (THR/pin-in-paste) solderable versions
■ For latching (bistable) version refer to Power Relay PK2 HE Latchin

■ Connector VCF4-1003 for Mini (Shrouded) ISO Relays Five position connector with snap-in terminal position assurance lock (ships unassembled). Integral tab interlocks connector and relay.
■ Connector VCF7-1000 for Maxi ISO Relays Four position connector has built-in features to lock in terminals

■ PCB Socket With the solder able connector Micro ISO relays with plug-in terminals can be mounted on lead frames. This allows easy and reasonable replacement in case of service.
■ Connector5 pole connector with snap-in pin to lock in frame.
■ Connector with mounting flap5 pole connector that can be mounted individually or interlocked.The connector has a snap-in pin to lock in frame.The mounting bracket also allows screw-on

■ Noise level below 50dBA
■ Pin assignment according to ISO 7588 part 3
■ Plug-in terminals
■ Customized versions on request
– Special marking
– Special covers (e.g. notches, release features)

■ High current version with limiting continuous current 30A at 85°C
■ Pin assignment according to ISO 7588 part 3
■ Customized versions on request
– 24VDC versions with special contact gap
– Integrated components (e.g. diode)
– Customized marking
– Special covers (e.g. notches, release features)
– For latching version refer to Micro Relay Latching
– For low noise version refer to Micro Relay Low Noise
– For high current version refer to part number table

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in terminals
■ Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and material

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in or PCB terminals Customized versions on request
– 24VDC versions with contact gap >0.8mm
– 48VDC version on request– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to Shrouded Power Relay F4 A and F4

■ Pin assignment similar to ISO 7588 part 1
■ Plug-in terminals
■ Customized versions on request
– Integrated components (e.g. resistor, diode)– Customized marking/color
– Special cover with bracket

■ Pin assignment similar to ISO 7588 part 1
■ Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color– Special covers (e.g. notches, release features, brackets)